5M160ZT100C5N

## Overview

The Intel 5M160ZT100C5N is a high-density Field Programmable Gate Array (FPGA) from the Intel (formerly Altera) 5M family, featuring high-performance logic resources, embedded memory blocks, and flexible I/O capabilities. It is designed for applications requiring complex logic integration, high-speed data processing, and system-level programmability. The device targets telecommunications, industrial automation, signal processing, and high-end embedded computing applications. With its combination of logic cells, embedded RAM, and support for advanced I/O standards, it enables designers to implement large-scale digital systems with high flexibility and performance.

## Key Features

* FPGA device with 160,000 logic elements (LEs)
* Embedded memory: 6,912 Kbits of M9K embedded RAM blocks
* I/O pins: 400 user-configurable I/Os supporting multiple I/O standards
* Maximum core voltage: 1.2 V for logic, 2.5 V / 3.3 V I/O support
* Programmable clock management with up to 24 phase-locked loops (PLLs)
* JTAG configuration and in-system programmability
* Partial reconfiguration support for dynamic system updates
* Package type: FineLine BGA (BGA 484) for high I/O density and thermal performance
* Operating temperature range: 0°C to +85°C commercial

## Logic and Performance

* Total logic elements (LEs): 160,000 for implementing complex digital circuits
* Logic array blocks (LABs): configurable for efficient resource utilization
* Maximum system frequency: up to 250 MHz depending on design complexity and routing
* Dedicated arithmetic functions including embedded multipliers for DSP applications
* Efficient pipelined architecture for high-throughput computation
* Support for wide bus widths and parallel processing for high-speed data paths

## Embedded Memory

* 6,912 Kbits of M9K block RAM, configurable as dual-port or single-port memory
* Distributed memory available within logic cells for small storage requirements
* Memory blocks support synchronous operation for predictable timing
* On-chip memory allows implementation of FIFOs, buffers, and lookup tables without external memory
* Supports multiple read/write operations per clock cycle in dual-port mode

## I/O Capabilities

* 400 I/O pins configurable for LVTTL, LVCMOS, SSTL, and HSTL standards
* Differential I/O support for high-speed communication interfaces
* Programmable pull-up/pull-down resistors and drive strength adjustment
* High-speed I/O capable of operating at hundreds of MHz for interface with DDR memory and SERDES applications
* Flexible bank organization for mixed I/O standards and voltage domains

## Clock Management

* Up to 24 PLLs for clock synthesis, phase alignment, and jitter reduction
* Clock multiplexing and division support to drive internal logic at multiple frequencies
* Enables low-jitter and high-precision timing for communication and signal processing
* Supports dynamic phase adjustment and clock frequency reconfiguration for system optimization

## Configuration and Programming

* JTAG programmable for development and in-system updates
* Non-volatile configuration storage through external flash or configuration PROM
* Supports partial reconfiguration for dynamic updates of portions of the FPGA without halting the entire design
* Configuration security features to prevent unauthorized access to programmed logic

## Electrical Characteristics

* Core voltage (VCCINT): 1.2 V typical
* I/O bank voltage (VCCIO): 1.8 V, 2.5 V, 3.3 V depending on I/O standard
* Maximum static power consumption: approximately 3–5 W depending on design complexity
* Typical dynamic power scales with logic utilization, I/O toggling, and clock frequency
* Low standby power modes supported for energy-efficient operation

## Thermal and Package Information

* Package: FineLine BGA 484
* Ball pitch: 1.0 mm typical
* Package dimensions: approximately 27 × 27 mm
* Thermal resistance junction-to-board: optimized for high-density PCB mounting
* Adequate cooling required for designs with high logic utilization and high-frequency operation

## Applications

* High-speed telecommunications systems and network processing
* Industrial automation requiring complex logic and real-time control
* Digital signal processing (DSP) applications including image and video processing
* Embedded computing and custom logic acceleration
* High-performance data acquisition and processing systems
* System-level integration combining control, communication, and memory interfaces

The Intel 5M160ZT100C5N FPGA provides a high-performance, flexible, and dense programmable logic solution. Its combination of large-scale logic resources, embedded memory, advanced I/O capabilities, and clock management makes it suitable for demanding industrial, telecommunications, and high-speed computing applications where custom digital logic and system flexibility are critical.