R5020PF

Active - DIODE GEN PURP 200V 50A DO21
Description:
DIODE GEN PURP 200V 50A DO21
R5020PF Specification
Product Attribute
Attribute Value
Voltage - DC Reverse (Vr) (Max)
200 V
Current - Average Rectified (Io)
50A
Voltage - Forward (Vf) (Max) @ If
1.05 V @ 50 A
Speed
Standard Recovery >500ns, >200mA (Io)
Reverse Recovery Time (trr)
-
Current - Reverse Leakage @ Vr
10 μA @ 200 V
Mounting Type
Through Hole
Supplier Device Package
DO-21
Operating Temperature - Junction
-65 ℃ ~ 175 ℃
R5020PF Description
The Microchip Technology R5020PF is a single-element, silicon standard-recovery power rectifier designed for high-current rectification applications. The device is specified for a 200 V maximum repetitive reverse-voltage rating and a 50 A average forward-current rating, and it uses a large DO-21 press-fit/stud-mount package. The available manufacturer and distributor records consistently identify R5020PF as a standard-recovery rectifier rather than a fast-recovery or ultrafast diode. The device is associated with the historical Microsemi silicon power-rectifier product family, which is now represented within Microchip Technology.
## Device Classification and Semiconductor Structure
R5020PF is a single silicon power diode. Its fundamental function is unidirectional current conduction combined with reverse-voltage blocking. Unlike a switching diode optimized for very short reverse-recovery intervals, R5020PF is explicitly classified as a standard-recovery rectifier. This distinction is important because its principal design objective is high-current, relatively high-voltage rectification rather than minimizing switching losses at high frequency. The product is identified in the R50PF family together with higher-voltage variants such as R5040PF, R5060PF, and R5080PF. The family documentation identifies this series as a silicon power rectifier family with glass-passivated die construction and high-voltage, low-leakage characteristics.
The 200 V rating places R5020PF at the lowest voltage rating within the referenced R50PF voltage sequence. The family numbering corresponds to progressively higher repetitive peak reverse-voltage ratings, while the basic rectifier construction remains within the same general product family. R5020PF is therefore intended for applications in which a 200 V reverse-voltage capability is sufficient and where the primary requirement is substantial forward-current handling.
## Reverse-Voltage Ratings
The maximum repetitive reverse-voltage specification for R5020PF is 200 V. This is the principal voltage rating that defines the reverse-blocking capability of the rectifier under repetitive operating conditions. The 200 V value must be treated as an absolute device rating rather than as a recommended nominal circuit voltage, because practical power circuits can produce transient voltage overshoot from transformer leakage inductance, wiring inductance, commutation effects, and switching-device transitions.
The historical R50PF family documentation identifies the devices by repetitive peak reverse voltage, with R5020PF corresponding to 200 V, R5040PF to 400 V, R5060PF to 600 V, and R5080PF to 800 V. This confirms that the R5020PF designation is specifically associated with the 200 V class of the family rather than representing a current or package designation.
The reverse-voltage rating should also be distinguished from the diode's forward-current capability. A 200 V rectifier rated at 50 A does not imply that 200 V and 50 A can simultaneously be applied as continuous operating conditions. The resulting semiconductor power dissipation, junction temperature, thermal impedance, and actual current waveform must remain within the applicable device and system limitations.
## Forward-Current Capability
R5020PF is specified for an average rectified forward current of 50 A. This is a substantial current rating and is consistent with the device's designation as a power rectifier. The current rating is not equivalent to a universal 50 A continuous-current guarantee under arbitrary environmental conditions. Rectifier current ratings depend on the specified thermal conditions and mounting configuration, and the actual allowable current must be established from the manufacturer's rating conditions and thermal characteristics.
The maximum forward-voltage specification is approximately 1.05 V at a forward current of 50 A in the current Microchip/DigiKey specification. Mouser's product record rounds this value to 1 V. The 1.05 V maximum value is the more precise value reported in the available electrical-characteristics record and should be used when a worst-case forward-loss calculation is required.
At 50 A, a forward drop of 1.05 V corresponds to a worst-case instantaneous conduction-loss product of approximately 52.5 W if the specified voltage and current occurred simultaneously. This calculation is an electrical power relationship rather than a separate datasheet rating. It illustrates why the 50 A current specification cannot be evaluated independently of the device's thermal environment and conduction-duty waveform.
## Surge-Current Capability
The specified maximum surge current is 700 A. This parameter provides an important indication of the diode's ability to tolerate a high-amplitude short-duration forward-current event, such as an inrush-current condition or a capacitor-charging transient, within the manufacturer's specified surge-test conditions. Both Mouser and the Microchip/DigiKey product records identify 700 A as the maximum surge-current value.
The 700 A surge rating must not be interpreted as an allowable continuous-current value or as a repetitive switching-current rating. Surge-current specifications are normally associated with a defined pulse waveform and thermal starting condition. Consequently, a circuit designer should not substitute 700 A into the normal current rating when evaluating steady-state operation.
The large difference between the 50 A average rectified-current rating and the 700 A surge rating is characteristic of power rectifiers: the semiconductor can tolerate a very high short-duration current pulse because the thermal energy deposited during a suitably short surge is substantially different from the thermal condition associated with sustained forward conduction.
## Reverse Leakage Characteristics
R5020PF is characterized as a low-leakage-current power rectifier. The available electrical specification gives a maximum reverse leakage current of 10 µA at a reverse voltage of 200 V in the DigiKey record. Other distributor records list 2 mA, indicating that different catalog fields may be associated with different test or temperature conditions. Because the exact test condition for the 2 mA database value is not exposed consistently, the 10 µA at 200 V specification is the more useful condition-specific value when evaluating the published electrical data.
Reverse leakage is temperature dependent, so a leakage value specified under a particular datasheet test condition should not be extrapolated directly to the maximum junction temperature. In high-impedance circuits, leakage can become an important parameter, whereas in conventional high-current rectification the forward conduction loss and thermal behavior generally dominate the loss calculation.
## Reverse-Recovery Behavior
R5020PF is explicitly categorized as a standard-recovery rectifier. This classification means that the device is not intended to provide the very short reverse-recovery time characteristic associated with fast-recovery or ultrafast power diodes. The current distributor classification places R5020PF in the standard-recovery category and describes the device as a standard-recovery rectifier.
One distributor record lists a recovery-time value of 8.3 ms, but this conflicts with the standard-recovery family documentation and with the usual interpretation of a rectifier recovery-time parameter. Because the available manufacturer-family material retrieved here does not provide a sufficiently clear condition-specific reverse-recovery specification for R5020PF, 8.3 ms should not be treated as a definitive semiconductor reverse-recovery-time specification. The technically defensible conclusion is that R5020PF is a standard-recovery device and therefore should not be selected on the assumption of fast reverse recovery.
For applications involving high-frequency PWM, hard commutation, or high-frequency bridge operation, reverse-recovery charge and associated switching loss would need to be evaluated from the applicable manufacturer's dynamic-characterization data. The standard-recovery classification alone does not provide a numerical switching-loss model.
## Package and Mechanical Configuration
R5020PF uses a DO-21 package and is identified by Microchip/DigiKey as a press-fit device, while Mouser describes the mounting style as stud mount. These descriptions refer to the same general high-current mechanical implementation rather than a conventional axial-leaded small-signal diode. The package is designed for power applications in which the electrical and thermal connection to the mounting structure is an important part of the device implementation.
The historical Microsemi family documentation identifies the package as DO-21 and gives dimensional information for the R/S50PF series. The family is also described as using a glass-passivated die. Glass passivation is relevant to the long-term surface protection of the semiconductor junction and is consistent with the high-voltage power-rectifier construction of the series.
Because the device uses a press-fit/stud-style package rather than a conventional PCB-mounted axial package, mechanical installation and thermal attachment are integral to the electrical design. The mounting interface should therefore be treated as part of the power path and thermal path rather than simply as a mechanical support.
## Thermal and Operating-Temperature Considerations
The available Microchip/DigiKey record specifies a junction-temperature operating range of −65°C to +175°C, while another distributor record associates +200°C with the maximum temperature. Because these values conflict, the +200°C value should not be treated as a definitive maximum junction operating temperature without confirmation from the controlling Microchip revision of the R5020PF datasheet. The conservative manufacturer-indexed value presently available from DigiKey is −65°C to +175°C.
Thermal design is particularly important because R5020PF is a 50 A rectifier with a forward voltage on the order of 1 V at rated current. Conduction loss therefore becomes a major part of the system thermal budget. The correct design procedure is to calculate the actual RMS and average current waveform, determine the associated diode conduction loss, establish the thermal path from the semiconductor junction through the package and mounting interface, and verify that the resulting junction temperature remains within the applicable rating.
The high surge-current capability also means that the diode may be suitable for circuits experiencing substantial short-duration inrush events, but repeated surge operation requires a separate thermal and reliability analysis. A single surge-current rating does not establish an allowable repetitive surge profile.
## Electrical Application Characteristics
The electrical characteristics make R5020PF fundamentally suitable for high-current, low-to-moderate-voltage rectification. The 200 V reverse-voltage capability provides reverse blocking for circuits whose repetitive reverse voltage remains below the specified limit, while the 50 A average-current rating supports substantial rectified current. The standard-recovery characteristic makes the device more appropriate for rectification functions where switching frequency and reverse-recovery loss are not the primary optimization parameters.
Typical engineering applications for this class of device include power-supply rectification, industrial rectifier stages, high-current DC conversion front ends, battery or DC-bus isolation functions, and other circuits requiring a single high-current silicon rectifier. These descriptions follow directly from the device's classification and electrical ratings; the exact suitability of a particular application depends on its voltage waveform, current waveform, thermal environment, surge conditions, and switching frequency.
## Product Status and Design Considerations
Current distributor records identify R5020PF as an active Microchip Technology product and show it as available through major component distribution channels. The Datasheet Archive also associates the exact R5020PF ordering code with Microchip Technology and identifies the historical R50PF family documentation.
There is a manufacturer-lineage consideration when interpreting historical documentation. The R5020PF documentation originated from the Microsemi power-semiconductor portfolio, whereas Microsemi was subsequently incorporated into Microchip Technology. Consequently, older Microsemi documents and current Microchip distributor records may use different corporate branding while referring to the same underlying device family. The electrical identity of R5020PF should nevertheless be controlled by the applicable current manufacturer documentation and exact ordering code.
## Summary
R5020PF is a high-current silicon standard-recovery power rectifier with a 200 V repetitive reverse-voltage rating and a 50 A average rectified-current rating. Its published maximum forward voltage is approximately 1.05 V at 50 A, its maximum surge-current rating is 700 A, and its construction uses a glass-passivated die in a DO-21 press-fit/stud-mount package.
The principal engineering characteristics are high forward-current capability, substantial short-duration surge capability, 200 V reverse-voltage blocking, and standard rather than fast reverse recovery. The device therefore belongs to the high-current conventional silicon-rectifier class, where conduction loss, thermal management, reverse-voltage margin, surge conditions, and commutation behavior are the primary design constraints. The available manufacturer-indexed temperature information supports a −65°C to +175°C junction range, while conflicting distributor metadata should not be used to extend that limit without confirmation from the controlling Microchip datasheet revision.