Categories
New Arrivals
Quality Control
Reviews
Home  /  Integrated Circuits (ICs)  /  Linear - Comparators  /  STMicroelectronics LM339DT

LM339DT

Active Icon Active - IC COMPARATOR 4 GEN PUR 14SO
LM339DT
LM339DT
STMicroelectronics
Manufacturer:
Mfr Part #
Datasheet:
Description:
IC COMPARATOR 4 GEN PUR 14SO
 
3D Model Icon

LM339DT Specification

Product Attribute
Attribute Value
Manufacturer
Series
-
Packaging
Tape & Reel (TR)
Product Status
Active
Type
General Purpose
Number of Elements
4
Output Type
CMOS, DTL, ECL, MOS, Open-Collector, TTL
Voltage - Supply, Single/Dual (?
2V ~ 32V, ?V ~ 16V
Voltage - Input Offset (Max)
5mV @ 30V
Current - Input Bias (Max)
0.25μA @ 5V
Current - Output (Typ)
16mA @ 5V
Current - Quiescent (Max)
2.5mA
CMRR, PSRR (Typ)
-
Propagation Delay (Max)
-
Hysteresis
-
Operating Temperature
0 ℃ ~ 70 ℃
Package / Case
14-SOIC (0.154", 3.90mm Width)
Mounting Type
Surface Mount
Supplier Device Package
14-SO

LM339DT Description

The LM339DT is a quad comparator integrated circuit designed by Texas Instruments. This device is part of the LM series of comparators and is known for its high-performance characteristics, making it suitable for a wide range of applications in electronics. Here’s a detailed overview of the LM339DT:

### Overview

The LM339DT is a quad comparator IC that contains four independent, high-gain, internally frequency-compensated comparators. Each comparator has an output stage that can drive TTL (Transistor-Transistor Logic) logic levels. The LM339DT is designed to compare two input voltages and output a digital signal indicating which input is higher. This IC is often used in applications requiring analog signal comparison, such as voltage level detection, zero-crossing detection, and analog-to-digital conversion.

### Key Features

#### 1. Quad Comparator Design

- Number of Comparators: The LM339DT contains four independent comparators within a single package. This allows for multiple comparisons in a single IC, reducing component count and board space.
- High-Gain Performance: Each comparator in the LM339DT features high gain, which provides accurate and reliable comparison of input voltages.

#### 2. Output Characteristics

- Open-Collector Outputs: The LM339DT features open-collector outputs, which means that the output stage can only pull the output to ground (logic low) but cannot drive it high. To achieve a high output state, an external pull-up resistor is required.
- TTL Compatibility: The open-collector outputs are TTL-compatible, making it easy to interface with TTL logic and other digital circuits.

#### 3. Input Characteristics

- Single-Ended Inputs: Each comparator in the LM339DT has two inputs: a non-inverting input (labeled as “+”) and an inverting input (labeled as “-”). The comparator outputs a high signal when the voltage at the non-inverting input is greater than the voltage at the inverting input.
- Input Offset Voltage: The IC has a low input offset voltage, which minimizes the error in voltage comparisons and ensures accuracy.

#### 4. Power Supply and Performance

- Supply Voltage Range: The LM339DT operates over a wide supply voltage range, typically from 2V to 36V. This versatility allows it to be used in a variety of power supply configurations.
- Power Consumption: The IC has low power consumption, making it suitable for battery-operated and low-power applications.
- Temperature Range: The LM339DT is designed to operate over a wide temperature range, typically from 0°C to 70°C (commercial grade). Extended temperature versions are also available for more demanding applications.

### Pin Configuration

The LM339DT is available in an 14-pin Dual-In-Line Package (DIP) or a 14-pin surface-mount SOIC package. The pin configuration is as follows:

- Pin 1: Comparator 1 Output
- Pin 2: Comparator 1 Non-Inverting Input
- Pin 3: Comparator 1 Inverting Input
- Pin 4: Comparator 2 Non-Inverting Input
- Pin 5: Comparator 2 Inverting Input
- Pin 6: Comparator 2 Output
- Pin 7: Comparator 3 Non-Inverting Input
- Pin 8: Comparator 3 Inverting Input
- Pin 9: Comparator 3 Output
- Pin 10: Comparator 4 Non-Inverting Input
- Pin 11: Comparator 4 Inverting Input
- Pin 12: Comparator 4 Output
- Pin 13: Vcc (Power Supply)
- Pin 14: Ground (GND)

### Applications

The LM339DT is used in various electronic applications, including:

- Voltage Level Detection: It can be used to detect when a voltage level crosses a certain threshold, useful in over-voltage and under-voltage protection circuits.
- Zero-Crossing Detection: The IC can detect when an AC signal crosses zero volts, which is useful in phase-locked loops and motor control circuits.
- Analog-to-Digital Conversion: In conjunction with reference voltages, the LM339DT can be used to create an analog-to-digital converter, where the comparators determine which voltage range an analog signal falls into.
- Temperature Monitoring: By comparing the output of temperature sensors to predefined thresholds, the LM339DT can be used in temperature monitoring systems.

### Advantages

- High-Speed Operation: The comparators in the LM339DT have fast response times, making them suitable for high-speed applications.
- Low Power Consumption: The IC consumes minimal power, which is beneficial for energy-efficient designs.
- Wide Supply Voltage Range: The wide supply voltage range makes the LM339DT versatile and adaptable to various power supply configurations.

### Limitations

- Open-Collector Outputs: While open-collector outputs are compatible with TTL logic, they require external pull-up resistors to function correctly, which can add to the design complexity.
- No Built-In Hysteresis: The LM339DT does not include built-in hysteresis, which can lead to instability in noisy environments. External hysteresis may be needed for reliable operation in such cases.

### Conclusion

The LM339DT is a versatile and reliable quad comparator IC that offers high-performance characteristics for a range of electronic applications. Its four independent comparators, open-collector outputs, and wide supply voltage range make it a valuable component in many circuits requiring voltage comparison. Whether used for voltage level detection, zero-crossing detection, or analog-to-digital conversion, the LM339DT provides accurate and efficient performance, making it a popular choice among engineers and designers.

LM339DT Stock: 39780

History Price
$0.43000
Certificates
5.0 / 5.0
review stars
Author Icon
Sofia Helena Almeida
Location Icon Brazil
5 stars
2019-09-30 13:46
Arrived fast, yet tested but the reviews are not good, great store.
Author Icon
Marco Moretti
Location Icon Italy
5 stars
2019-11-16 09:43
Fast shipping excellent item seller recommended.
Author Icon
Pedro Henrique
Location Icon Brazil
5 stars
2019-09-22 16:18
Super satisfied with the product!!!
Author Icon
Gintaras Arvydas
Location Icon Lithuania
5 stars
2019-11-24 02:50
Delivery of goods and quality I am happy. All very well.
The goods delivered quickly.
Author Icon
Natalia Nowicka
Location Icon Poland
5 stars
2019-07-04 17:48
Goods consistent with your order! :)

LM339DT Related Parts

LM311D
LM393DT
LM393DT
LM311D
LM311D
LM311DR
LM311DG4
LM306D
LM306DR
LM393QT
LM306DRE4
LM393N
Request for Quotation
Part Number *
Manufacturer
Contact Person *
Email Address *
Inquiry Quantity *
Delivery Country *